Jinjiang Jiaxing Home Co.,Ltd.

Model Number: DS -----SYS024 Brand Name: DOSUN Key Specifications/Special Features: The system is a small AC & DC power supply system which is designed for the Villages, districts, health centers, farmers, herdsmen, outdoor camping, tourism, military, etc. Easy to operate, convenient to carry. It can power most appliances found in the home, office, shed or workplace; such as TVs, stereos, games, lights, fans, laptops, phones, and power tools. Solar panel, solar controller, inverter and battery all are put in one box.Specifications:Item parameter solar panel (Monocrystalline) 20W 14VInverter (Pure sine wave) 150W AC100V~240VBattery (Lithium polymer) 12V 16AhController 12V 5ALED 3W lighting with SOS featureInterface (Output)AC100V~240V:1pcs
DC12V: 2pcs
Car socket: 1pcs 5V
USB: 2pcs
Interface (Input) DC12-23V input(solar) AC input.

Product size: 397*316*106mm
Packaging size: 435*375*135mm
Net weight: 5.5kg
Gross weight: 6.0kg

Charging solar box
How to charge the box from sunlight
There are 2 ways to charge Box by sunlight
1)Open the box and put it under directly sunlight, then it is charging(the battery capacity display is going up). Make sure the solar panel can get as much sunlight as possible;
2)Use an extra solar panel(Max.50W) to connect with the 12V~23V DC INPUT connector and put the solar panel under directly sunlight, then it is charging the power system.
After the LCD screen shows the battery is 100% full, please close the box or take the extra solar panel away from sunlight to protect the battery.

How to charge the box from utility grid
There are 2 steps to charge Box by utility grid:
1)Connect the charging cable with the 100~240VAC INPUT connector;
2)Connect another side of the charging cable with utility grid, then it is charging.
Remove the charging cable after the battery is 100% full.

How to charge the box by car socket
There are 2 steps to charge box by car:
1)Connect one side of the car charging cable(not included in the power unit) with the 12V~23V DC INPUT connector;
2)Connect another side with car socket and start the car, then it is charging.
Remove the charging cable after the battery is 100% full.

Using solar box
AC Power
1)Turn on the master switch;
2)Press the AC on/off button;
3)Connect AC 100~240V device to 100~240V AC OUTPUT socket, make sure the load power not more than 150W;
4)Disconnect the load from the box when finish using, turn OFF AC power.

DC Power
1)Turn on the master switch;
2)Press the DC on/off button;
3)Connect DC 12V or USB 5V device to the corresponding DC sockets, make sure the 12V load power not more than 96W;
4)Disconnect the load from the box when finish using, turn OFF DC power.

AC & DC power at the same time
3W LED bulb